by productsupport | Apr 3, 2019 | Pro Seal 896 for Concrete – Application and Finishing
Types of Spray Applicators WBS Commercial Spray Unit 500m2 per hour performance (designed & recommended for WBS Pro Seal 896 applications) There are various battery spray applicators, be sure they have a fan spray head. There are various hand pump spray...
by productsupport | Apr 3, 2019 | Pro Seal 896 for Concrete – Application and Finishing
Types of Spray Units WBS Commercial Spray Unit 500m2 per hour performance (designed & recommended for WBS Pro Seal 896 applications) Watch the video below for filling and mixing the CSU by WBS. Concrete Sealing 500m2 per hour with WBS ‘Commercial Spray...
by productsupport | Apr 3, 2019 | Pro Seal 896 for Concrete – Application and Finishing
Pro Seal 896 must always go down on a wet surface. Pressure cleaning with water is always a preference for sealing old concrete and stone surfaces. Alternatively, use a wet broom setting clean any surface you are about to seal use Pro Seal 896. Please watch the videos...
by productsupport | Apr 3, 2019 | Pro Seal 896 for Concrete – Application and Finishing
Rates of application for Pro Seal 896 On average Pro Seal 896 when mixed to the required application ratio, depending on concrete porosity, should be applied at a rate of 1 Litre for every 5m2....
by productsupport | Apr 3, 2019 | Pro Seal 896 for Concrete – Application and Finishing
Pro Seal 896 Application and Finishing Spraying Pro Seal 896, averaging 1 Litre for every 5m2, is pretty easy on a wet surface. Always wait 20-30 minutes (more time required if over cast, light rain or cold weather) after applying. Look for any puddles forming and...
by productsupport | Apr 3, 2019 | Pro Seal 896 for Concrete – Application and Finishing
End of Job Clean Up Pro Seal 896 cleans up easily with water. Always wash out on grassy areas or into painters wash bays. When washing out on a lawn just saturate any spilt sealer till diluted and not visible. Be sure to clean any over spray of all walls, glass and...
